| |
| |
| Polymer Processing Aids |
| |
- Improve processing & end product quality
-
Protect PE chains from breakage especially when processing at high shear that normally decreases mechanical properties
-
Increase output and/or lower power consumption due to lower friction inside the extruder
-
Prevent melt fracture & improve optical properties
-
Decrease die deposits & increase screw lifetime while using abrasive material
|
| |
| |
| Micro PPA 21 Polymer Processing Aid |
|
|
|
Polymer processing aid with 2% fluoro complex for LLDPE carrier
- Color
Natural
- Ingredients
Active: 2% Fluoro complex
Carrier: LLDPE
- Dosage
First 10 to 30 minutes add 20% allowing lubricating the machine, then 0.5 to 2% depending on the end application
Recommended for LDPE, HDPE & LLDPE at low MFI where the processing is more critical.
|
|
|
| |
|
| |
| Micro PPA 27D Polymer Processing Aid |
|
|
|
Polymer processing aid for producing blown films; with 0.2% anti-oxidant with LLDPE/HDPE carrier
- Ingredients
Processing Aid: 3.0%
Anti-Oxidant: 0.2%. Inert with other additives
Carrier
LLDPE/HDPE
- Dosage
1 to 3% depending on the end application
- Lifetime and storage
12 months
Storage in very humid areas or under direct sunlight for long periods should be avoided
|
|
|
| |
|
| |
| Micro PPA 31 Polymer Processing Aid |
|
|
|
Polymer processing aid with 3% fluoro complex for LLDPE carrier
- Color
Natural
- Ingredients
Active: 3% Fluoro complex
Carrier: LLDPE
- Dosage
0.5 to 2.0 % depending on the end application
Recommended for LDPE, HDPE & LLDPE at low MFI where the processing is more critical.
|
|
|
| |
|
| |
| Micro PPA 44 Polymer Processing Aid |
|
|
|
Polymer processing aid with 4% fluoro complex with LLDPE carrier
- Color
Natural
- Ingredients
Active: 4% Fluoro complex
Carrier: LLDPE
- Dosage
0.5 to 2.0% depending on the end application
Recommended for LDPE, HDPE & LLDPE at low MFI where the processing is more critical.
|
|
|
| |
|
| |
| | |
| |
| |
|
|
| |
| |
| Product Search |
 |
|
|
|
|
|
|
|
|
| |
|
